Configure Plugin with IBM HTTP Server in httpd.conf file (Real-time method):

Configure Plugin with IBM HTTP Server in httpd.conf file (Real-time method):

Note: It is one way to configure Plugin with IHS. If you follow this steps, We don't need to install WCT for configure Plug-in with IBM HTTP Server (IHS).

1)Create webserver definition in admin console.
2)Generate and propagate the plugin in admin console.
3)Go to Plugin directory, You can find plugin-cfg.xml file

  ex: /opt/IBM/WebSphere/Plugins/config//plugin-cfg.xml

4) Now go to /conf directory
5)open httpd.conf file using vi editor.
6) Add below lines at end of the httpd.conf file

LoadModule was_ap22_module /opt/IBM/WebSphere/Plugins/bin/64bits/mod_was_ap22_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config//plugin-cfg.xml

Note: Above directory path may different in your environment. Please check and made a change based on your environment

7)Restart the IHS
8)Now plugin is configured with IBM HTTP Server. To test, deploy an application in WAS and access that application through IBM HTTP Server.


Don't miss to provide your inputs on my article.

Thank you very much folks!!!!

Installing WebSphere Application Server (WAS) Plugin v8.5.5 by using the imcl command on Linux(WebSphere Jungle) -- Real-time method

Follow  the steps to install WebSphere Application Server (WAS) Plugin v8.5.5 by using the imcl command on Linux  :

               
Note : It is one of the way to install WebSphere Application Server (WAS) Plugin v8.5.5 in comapines.

1.Download  WebSphere Application Server (WAS) Plugin version 8.5  trial package from IBM website. This software  comes with 2 disks like
                                was.repo.8550.plg.ilan_part1.zip
                                was.repo.8550.plg.ilan_part2.zip
Note:
                                Silent installation cannot install packages that are contained different disks.
                 ex:
                       here I use IHS 8.5.5.0 trail version. It comes 2 different disks like
                          was.repo.8550.plg.ilan_part1.zip
                          was.repo.8550.plg.ilan_part2.zip
                       Then we need to unzip these 2 zip files. It will be created 2 diffrent folders like
                        was.repo.8550.plg.ilan_part1
                        was.repo.8550.plg.ilan_part2
Then we merge these 2 folders into one folder like "was.repo.8550.plg.ilan".

2.Before installing  WebSphere Application Server (WAS) Plugin v8.5.5  trial package. You need to download & install Installation Manager(IM) in your box(system) from IBM website.
                           If u want steps for installation of Installation Manager(IM)(Real time)  u can verify my previous article.
         
3.open putty to connect server
    Need to provide IP address to connect the server

4.Go to Installation Manager directory.
    cd /opt/IBM/InstallationManager/tools


5.Execute the below command

./imcl install com.ibm.websphere.PLG.v85_8.5.5000.20130514_1044,com.ibm.jre.6_64bit -repositories /tmp/was.repo.8550.plg.ilan/repository.config -installationDirectory /opt/IBM/Plugins85 -

sharedResourcesDirectory /opt/IBM/IBMIMShared -acceptLicense -showProgress


 Details of command :
com.ibm.websphere.PLG.v85_8.5.5000.20130514_1044 - Package Name (It may different in your package. Please check the package name as per your binaries)
com.ibm.jre.6_64bit - It'll install 64 bit
/tmp/was.repo.8550.plg.ilan/ - where package is available. Need to provide binaries path
/opt/IBM/Plugins85 - Where to install IHS.

Note: You can change above details based on your environment and requirement.

6.Now u can check, your box has WebSphere Application Server (WAS) Plugin v8.5.5


Note:
1)We don't get the WebSphere Application Server (WAS) Plugin v8.5.5 Trail version in IBM website now.
2)Please comment below to get the trail version of WebSphere Application Server (WAS) Plugin v8.5.5

Don't miss to provide your inputs on my article.

Thank you very much folks!!!!

Installing IBM HTTP Server (IHS) v8.5.5 by using the imcl command on Linux(WebSphere Jungle) -- Real-time method

Follow  the steps to install IBM HTTP Server (IHS) v8.5.5 by using the imcl command on Linux  :

                Note : It is one of the way to install IHS8.5.5 in comapines.

1.Download  IBM HTTP Server (IHS)  version 8.5  trial package from IBM website. This software  comes with 2 disks like
                                 was.repo.8550.ihs.ilan_part1.zip
                          was.repo.8550.ihs.ilan_part2.zip
Note:
                                Silent installation cannot install packages that are contained different disks.
                 ex:
                       here I use IHS 8.5.5.0 trail version. It comes 2 different disks like
                          was.repo.8550.ihs.ilan_part1.zip
                          was.repo.8550.ihs.ilan_part2.zip
                       Then we need to unzip these 2 zip files. It will be created 2 diffrent folders like
                        was.repo.8550.ihs.ilan_part1
                        was.repo.8550.ihs.ilan_part2
Then we merge these 2 folders into one folder like "was.repo.8550.ihs.ilan".

2.Before installing  IBM HTTP server  version 8.5  trial package. You need to download & install Installation Manager(IM) in your box(system) from IBM website.
                           If u want steps for installation of Installation Manager(IM)(Real time)  u can verify my previous article.
         
3.open putty to connect server
    Need to provide IP address to connect the server

4.Go to Installation Manager directory.
    cd /opt/IBM/InstallationManager/tools


5.Execute the below command

./imcl install com.ibm.websphere.IHS.v85_8.5.5000.20130514_1044,arch.64bit -repositories /tmp/was.repo.8550.ihs.ilan/repository.config -installationDirectory /opt/IBM/HTTPServer85 -sharedResourcesDirectory /opt/IBM/IMShared -properties user.ihs.httpPort=80 -acceptLicense -showProgress

 Details of command :
com.ibm.websphere.IHS.v85_8.5.5000.20130514_1044 - Package Name (It may different in your package. Please check the package name as per your binaries)
arch.64bit - It'll install 64 bit
/tmp/was.repo.8550.ihs.ilan/ - where package is available. Need to provide binaries path
/opt/IBM/HTTPServer85 - Where to install IHS.
user.ihs.httpPort=80 - It'll allocate 80 port for IHS.
Note: You can change above details based on your environment and requirement.

6.Now u can check, your box has IBM HTTP Server (IHS) version 8.5.5


Note:
1)We don't get the IHS8.5 Trail version in IBM website now.
2)Please comment below to get the trail version of IHS8.5.5

Don't miss to provide your inputs on my article.

Thank you very much folks!!!!

installing WebSphere Application Server v8.5.5 by using the imcl command on Linux(WebSphere Jungle) -- Real-time method

Follow  the steps to install IBM WebSphere Application Server v8.5.5 by using the imcl command on Linux  :

             
Note : It is one of the way to install WASv8.5.5 in comapines.

1.Download  IBM WebSphere Application Server  version 8.5  trial package from IBM website. This software  comes with 3 disks like
                                 was.repo.8550.ndtrial_part1.zip
                                 was.repo.8550.ndtrial_part2.zip
                                 was.repo.8550.ndtrial_part3.zip

Note:
                                Silent installation cannot install packages that are contained different disks.
                 ex:
                       here I use WAS 8.5.5.0 trail version. It comes 3 different disks.
                       First we need to unzip these 3 zip files. It will be created 3 different folders like
                        was.repo.8550.ndtrial_part1
                        was.repo.8550.ndtrial_part2
                        was.repo.8550.ndtrial_part3

Then we merge these 3 folders into one folder like "was.repo.8550.ndtrial".
2.Before installing  IBM WebSphere Application Server  version 8.5  trial package. You need to download & install Installation Manager(IM) in your box(system) from IBM website.
                           If u want steps for installation of Installation Manager(IM)(Real time)  u can verify my previous article.
         
3.open putty to connect server
    Need to provide IP address to connect the server

4.Unzip the package zip files using unzip command.
     ex:
           $unzip was.repo.8550.ndtrial_part1.zip
   $unzip was.repo.8550.ndtrial_part2.zip
   $unzip was.repo.8550.ndtrial_part3.zip

5.Merge 3 folders into single folder.
       ex: Provide same folder name as "was.repo.8550.ndtrial" to 3 folders. Then it'll become single folder.

6.Go to Installation Manager directory.
    cd /opt/IBM/InstallationManager/tools

7.Execute the below command

./imcl install com.ibm.websphere.ND.v85_8.5.5000.20130514_1044,core.feature,ejbdeploy,com.ibm.sdk.6_64bit -repositories /tmp/was.repo.8550.ndtrial/repository.config -installationDirectory /opt/IBM/WebSphere85/AppServer -sharedResourcesDirectory /opt/IBM/IMShared -acceptLicense -log /tmp/WAS8.5_install.log -showProgress

Details of command :
com.ibm.websphere.ND.v85_8.5.5000.20130514_1044 - Package Name (It may different in your package. Please check the package name as per your binaries)
        core.feature,ejbdeploy,com.ibm.sdk.6_64bit - It'll install sdk 64 bit and default features.
/tmp/was.repo.8550.ndtrial/ - where package is available. Need to provide binaries path
/opt/IBM/WebSphere85/AppServer - Where to install WAS.

Note: You can change above details based on your environment and requirement.

8.Now u can check, your box has IBM WebSphere Application Server version 8.5.5.


Note:
1)We don't get the WAS8.5 Trail version in IBM website now.
2)Please comment below to get the trail version of WAS8.5.5

Don't miss to provide your inputs on my article.

Thank you very much folks!!!!